Norris Cafemate

High Performance Under all Conditions 

Versatile

• Three cycle options gives the Cafemate the versatility to wash a range of items which include plates up to 12â€� (30cm) in diameter. The one minute cycle can be used for washing glasses and lightly soiled plates. The 2 minute cycle is used for a normal wash and the 5 minute cycle allows the machine to wash more heavily soiled articles which can include some dishes. For the first time we  have a commercial machine that is suitable for domestic use.

Hot Water Booster Tank

• Hot water is delivered via the inbuilt water booster tank which has low water level element protection. Large capacity elements ensures minimum delay between wash cycles.

• An internal interlock will prevent the machine from operating unless the temperature required by health regulation has been reached. Clearly legible wash and rinse water temperature gauges allow the operator to confirm that the machine is operating within the prescribed range.

Simple to Install

• The Cafemate comes standard with a pump out drain and includes the hot water connection hose. Simply connect the drain to the dishwasher connection on the “Sâ€� trap and connect the hose to the hot water tap. Plug the power cord into a 15 Amp outlet and the machine is ready to operate.

Durability

• Norris machines have always been known for their strength and reliability. With the Cafemate Elite Series II the standards have been set even higher. Both the wash and rinse pumps are fitted with our unique stainless steel impellors for durability and longevity. The door has a fully sealed clean inner skin for added strength and ease of cleaning. The rinse tank is manufactured from a special high grade stainless steel to combat Australia’s highly corrosive water. So confident are we at Norris in the strength of the machine that we offer a 5 year warranty on the cabinet which includes the door.

Easy to maintain

• Norris has deliberately refrained from using electronics in their machines. All controls are electromechanical and are readily available, to ensure that should your machine ever need servicing a local tradesperson will be able to get you up and running with minimum disruption and cost. The wash and rinse arms have been designed into a single assembly making them easier to remove for cleaning & maintenance. Unlike imported machines, Norris maintains a stock of spare parts for their older machines and all Norris machines are supported by a nationwide network of service agents.

NOTES:

1) Norris recommends mains pressure hot water systems between 140 to 350kPa.

2) Parts warranty extended to 2 years, if warranty card is returned to Norris  within 14 days of purchase.

3) Correct at time of printing, Norris is continually developing & upgrading its products & reserves the right to alter specifications without notice.